TR7 & TR8 Mailing List

Front springs

0 Members and 1 Guest are viewing this topic.

Bruce Riley

Front springs
« on: March 23, 2016, 04:53:04 PM »
Hey guys,

Bruce the novice here.  I recently measured my ride height on my TR7 and

find it is about an inch low on each front side.  After reading Jim's

article in Issue #32 I am thinking about replacing the springs or the bump

stop depending on what I find.  How important are the tools necessary to do

this.  The ROM specifies using the P5045, coil spring retainer and the

RTC360 Retaining washer holder wrench.

Your comments are welcome.

thanks

Bruce

--

.

Archives provided courtesy  http://www.triumphwedgeowners.org



Re: Front springs
« Reply #1 on: March 23, 2016, 05:05:36 PM »
You need a coil spring compressor and an impact gun wouldn't be a bad

investment if you don't have one. Otherwise you should be okay.