>
> Date: Sun, 14 Jul 2019 08:51:17 -0400
> From: Bill
> Subject: Ballast & Coil - Wht/Slt Wire for Tach
>
> Hi All,
>
> Can I bypass the ballast resistor and run the wht/slt wire right to the
> coil for the tach feed?
>
> Seems that according to the Lumenition documentation I may have had the
> system hooked up with the incorrect ballast resistor setup of 3 ohms or
> more.B As I read the stock BR print it shows only 0.7 Ohm to the coil.B
> I don't remember if the 25 year old MSD Blaster2 had resistance built in
> or not, though it has worked great for 20 years.
>
> Had it all together but starter solenoid would not kick, so the starter
> had to come out, necessitating exhaust removal etc.B B Foot bone
> connected to the shin bone, shin bone connected to the knee bone...
>
> TIA
>
> Bill
>
>