TR7 & TR8 Mailing List

Wiring - white / yellow wire at starter

0 Members and 1 Guest are viewing this topic.

impster@maine.rr.com

Wiring - white / yellow wire at starter
« on: April 05, 2019, 05:47:31 AM »
Can someone remind me of the purpose of the white w/ yellow stripe wire that

is connected to the starter?  Years ago, when I installed a gear reduction

starter, I left it disconnected after being told its purpose and realizing I

could run the car without it.  I'm now rebuilding parts of my wire harness

and wondering if leaving it disconnected will affect anything at the other

end at the ballast resistor.  I can trace the wires in the wire schematic

but I sometimes have a difficult time understanding what each does.

--

.

Archives provided courtesy  http://www.triumphwedgeowners.org